Heat Transfer Vinyl
Heat Transfer Vinyl Carrier Sheet - Siser TTD Easy Mask HTV Transfer Mask, Patterned HTV Transfer Sheet
Regular price
$1.50
**Please note you do NOT need to purchase this item in order to use any of the products we currently offer. This product is commonly used with the patterned and printed heat transfer vinyls. We offer this transfer mask/carrier sheet because many companies do not sell the transfer mask with the patterned htv and we are simply providing a product to assist you with that. Our patterned htv does already include 1 sheet of this with each patterned htv sheet you purchase from our shop!
1 12x12" OR 12x24" Sheet Siser TTD Transfer Mask
Siser's TTD Mask can also be used as a rhinestone template transfer material!
Siser TTD Mask has a medium tack adhesive that is formulated to work with ALL of Siser's ColorPrint™ digital materials. It is recommended that you use a cold laminator with the TTD Easy Mask for large production runs. Also, if you are not heat-applying the product immediately, place the image back on the shiny side of the masking paper.
How to use:
Cut a piece of mask slightly wider than the image to cover.
Remove the paper backing from the mask and set aside.
Adhesive side up, place the mask down on a smooth, firm surface.
With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
Place your squeegee at a 45° angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
Repeat this process in several directions.
Lift a corner of the mask, use a steady motion to seperate the mask from the image.
Place the transfered image back on the shiny side of the origianl masking paper you had set aside.
1 12x12" OR 12x24" Sheet Siser TTD Transfer Mask
Siser's TTD Mask can also be used as a rhinestone template transfer material!
Siser TTD Mask has a medium tack adhesive that is formulated to work with ALL of Siser's ColorPrint™ digital materials. It is recommended that you use a cold laminator with the TTD Easy Mask for large production runs. Also, if you are not heat-applying the product immediately, place the image back on the shiny side of the masking paper.
How to use:
Cut a piece of mask slightly wider than the image to cover.
Remove the paper backing from the mask and set aside.
Adhesive side up, place the mask down on a smooth, firm surface.
With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
Place your squeegee at a 45° angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
Repeat this process in several directions.
Lift a corner of the mask, use a steady motion to seperate the mask from the image.
Place the transfered image back on the shiny side of the origianl masking paper you had set aside.